W1088 Dual LED Digital Temperature Sensor Meter Controller Electric Heating Thermostat 220V Incubator Thermoregulator(Dc12v)

SensorAmmetersSpecifications:Display Type: DigitalShell Material: ABS + PCBTemperature Sensor: NTC 10KSenor Length: 1mTemperature Measuring Range: -55 ° C ~ 120 ° CResolution: 0.1 ° CAccuracy: ±1° CPower Supply: 110-220VAC 50/60Hz 12V DC 24V DCRelay Contact Capacity: Two Relay Max 10A Output Type: Direct OutputSize: 72*56*31mm Packing List:1 x Temperature Controller2 x Waterproof SensorNO.1 Work Signal NO.1 Measured TemperatureNO.1 Start Temperature SetNO.1 Stop Temperature SetNO.2 Work SignalNO.2 Measured TemperatureNO.2 Stop Temperature SetNO.2 Start Temperature SetItem NO.Operation instruction:A. Set The Starting Temperature:Press the UPbutton once to display the starting temperature. Long press the UPbutton for about 3 seconds The required temperature can be set by the UPand DOWNbuttons.B. Set Stop Temperature:Press the DOWN button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the UPand DOWNbuttons.C.Press UP button andUp button at the same time to setting mode:Press UP and UP buttons for 3 seconds at the same time to enter the setting mode display P0 the first group temperature delay press UP and DOWN to adjust 0~60 minutes default 0 after adjustment press UP since P1 the second group temperature delay press UP and DOWN to adjust 0~60 minutes default 0. After adjustment press UP since P2 high temperature alarm function default 120 press UP and DOWN to adjust. Press UP to enter P3 low temperature Alarm default -55 press UP and DOWN to adjust wait for the second to automatically exit. Press DOWN and DOWN 3 seconds to reset to settings.Menu InstructionCodeFunctionSet RangeDefaultP0: Delay start0-60 minutes0 P1: Delay start0-

• Sensor
• Ammeters
• W1088 Dual LED Digital Temperature Sensor Meter Controller Electric Heating Thermostat 220V Aquarium Incubator Thermoregulator